CAUTION:
For
continued protection against fire. disconnect power-supply before
using
the machine, check the power-supply grounded connection well
before
using.
disconnect
power-supply before replacing different-function heat unit
put
in the object going to be shaped, close up the pressure handle and
rotate
the adjusting screw to get a proper pressure.
the
surface of the heat unit is hot during heat pressing, do not touch them with no
proper protection.
BASIC
PREPARATION BEFORE USING
plug
the three-core power line into the outlet, check whether the power
supply
is conformity with the rated voltage of the machine, there should be a reliable
ground wire for the power supply.
put
in the object going to be shaped, close up the handle and rotate the
adjusting
screw to get a proper pressure (the pressure of the mug press unit is a screw.
turn
on the power switch, and the instrument board will display the temperature .
set
the temperature and time according to the table below and get the
specific
corresponding temperature and timing setting.
Press object initial temperature highest temperature time
Mugs 230 330 40
Tiles 230 330 40
Metal board 230 300 40
Plate 355 355 150
T-shirt 355 355
Sublimation
paper: 30~50 sec
T-shirt paper: 10~20 sec
Learn
to set the temperature and time
press
the mode key once, see the “set light” turning red. Pries the plus or minus key
to set the initial heating temperature.
press
the mode key for the second time, see the “temperature light” turning red, Press
the plus or minus key to set the highest heating temperature.
press
the mode key for the third time, see the “time light” turning red, Press the
plus or minus key to set the proper heating time.
press
the mode key for the fourth time ,finish the setting and the machine stands by
to work.
Attention:
The
initial heating temperature should be set between 200~380, the highest heating
temperature should be set between 200~430. The timing should be set between
0~999 sec.
IF
the initial heating temperature is 230, the highest heating temperature should
be set only between 230~430. as the same , IF the highest heating temperature
is 380, the initial heating temperature should be set only between 200~380.
Initial
heating temperature always =< highest heating temperature
Operation:
T-shirt
and plate:
Preset
the corresponding temperature and timing for the object that is going to be
shaped, it needs a few minutes to achieve the initial heating temperature
When
the temperature achieves the initial heating temperature, it will turn into
constant temperature status automatically. Press the executive key, then close
up the pressure handle, wait for a few times(set),you will hear a hint sound
,the pressing is finished, pull up the pressure handle, press the executive
key. Do the next object or turn off the power.
Mugs,tiles,metal
board:
Preset
the corresponding temperature and timing for the object that is going to be
shaped. put into the object, close up the pressure handle, Press the executive
key, the temperature will straight to achieves the highest heating temperature,
wait for a few times(set), you will hear a hint sound ,the pressing is
finished, pull up the pressure handle, press the executive key. Do the next
object or turn off the power.
Mr. Chauvin Tsau
Colorway Promo Photo Gifts Co.,
LTD.
Add: Shenzhen, CHINA
Mob:+86 158 1479 2457 / Msg: Chauvin.Tsau@Facebook.com /
Mailbox: 15814792457@qq.com / Follow me
on Twitter @ChauvinTsau
